|
       
Sequence centrifugal pumps are designed and built to meet the special needs of ponds, waterscapes and aquaculture. Buying "quality" really pays. Not only do you get years of dependable service, but you enjoy tremendous savings on your utility bill, every month.
 
| These are the work horses of the industry. They provide tremendous flow rates, with enough pressure (head) to handle the requirements of most systems with biological filters and moderate height waterfalls.
They also are used extensively for the transfer and
recirculation requirements of filtration systems, water features, streams, fountains and aquaculture.
The flow rates range from about 2500 gph to 4800 gph and are customarily used on ponds from 2000 gallons on up.
|
-
For larger systems, plumb two or more units in parallel to economically multiply your flow.
-
Units can be hard wired or if requested, can have cords with plug
pre-installed.
-
Housing is molded of glass filled Noryl®.
-
Ports are 1-1/2" NPT on suction and discharge.
-
Motors are enclosed for maximum protection.
|
|
|
 |
Click to enlarge then click your browsers back arrow to return
|
| Model |
K7K3.111 |
K6K3.111 |
K5J3.111 |
K5TH3.111 |
K4H3.111 |
K3H3.111 |
| Size |
1/4 H.P. |
1/4 H.P. |
1/6 H.P. |
1/8 H.P. |
1/8 H.P. |
1/8 H.P. |
| Head |
23' Max. Head |
22' Max. Head |
22' Max. Head |
19' Max. Head |
21' Max. Head |
21' Max. Head |
| Flow |
4800gph @ 11.5' |
4400gph @ 10' |
3900gph @ 8.5' |
3400gph @ 6.5' |
3000gph @ 5.6' |
2590gph @ 4.4' |
| Draw |
348 Watts |
289 Watts |
250 Watts |
202 Watts |
189 Watts |
168 Watts |
Click to Enlarge
Now you can get a smaller pump that has the same high quality as our larger units. The Sequence 750 provides its full rated flows, even with heads up to eight feet (unlike cheaper units which may lose over half their rated flow with this same head). Designed for flows from 500 to 2000gph, these
units are perfect for ponds up to 2500 gallons.
Click to Enlarge
 |
 |
| Model |
J8H3.11 |
J5H3.111 |
J2H3.111 |
| Size |
1/8 H.P. |
1/8 H.P. |
1/8 H.P. |
| Head |
12' Max. Head |
12' Max. Head |
11' Max. Head |
| Flow |
2000gph @ 8.5' |
1600gph @ 8' |
1200gph @ 8' |
| Draw |
138 Watts |
117 Watts |
107 Watts |
|
-
Ports are 2" NPT suction and 1-1/2" NPT discharge.
-
Units are pre-wired with an 8' cord and 115V plug.
-
Housing is molded of glass filled polypropylene.
-
The motors are enclosed, for excellent protection, at no extra
charge.
|
|
Phone:
303-883-8000