|
     
|
|
- VORTEX IMPELLER
Volute impeller made of Fiberglass
Reinforced Plastic (FRP) provides continuous operation with
minimum abrasive wear.
- ABRASION AND CORROSION RESISTANT
Motor casing made of 304 stainless steel
and pump casing made of fiberglass-reinforced engineering
composite. The materials are strong and lightweight with high
resistance to rust, corrosion, abrasion and impact. Casing
also available in transparent ABS material.
- RUGGED MOTOR
Motor housing: Stainless steel -
corrosion resistant and good heat dissipation.
Motor: Oil free (dry motor, air filled).
Designed for long-life continuous operation.
- BUILT-IN OVERLOAD & THERMAL
PROTECTION
Self resetting automatic protection for
motor against overload or overheat conditions.
- HIGH QUALITY MECHANICAL SEALS
Double Silicon Carbide mechanical seals
(impeller side) in oil chamber with external lip seal. SiC
provide greater hardness (approaching diamond), withstanding
of pumping pressure, corrosion and abrasion resistant,
self-lubrication and temperature fluctuation tolerance.
- SOLID
HANDLING
3 mm (1/8 in) solid handling
|
|
|
|
|
|
|
PERFORMANCE
 |
| |
| SPECIFICATION |
| Pump
Model |
AT-120 / A |
AT-180 / A |
| Discharge |
25 mm, 1 in |
25 mm, 1 in |
| Motor
Rating |
0.12 kW , 1/6 HP |
0.165 kW, 1/5 HP |
Voltage,
Frequency, Phase
(available models) |
100V
- 120V AC, 50/60Hz, Single Phase
200V - 240V AC, 50Hz, Single Phase |
| Maximum
Head |
7 m, 23 ft |
9 m, 29.5 ft |
Maximum
Capacity
(110V, 60Hz) |
lpm, lph |
80, 4800 |
120, 7200 |
| m3/min,
m3/hr |
0.08, 4.8 |
0.12, 7.2 |
| gpm, gph |
21, 1300 |
32, 1900 |
| Maximum
Solid Passage |
3 mm, 1/8 in |
3 mm, 1/8 in |
| Physical
Dimension |
Max Diameter |
14 cm, 5.5 in |
14 cm, 5.5 in |
| Max Height |
27 cm, 10.75 in |
28.5 cm, 11.25 in |
| Weight |
3.6 kg, 8 lb |
4 kg, 9 lb |
| Power
Cable |
6 m, 20 ft |
6 m, 20 ft |
|
| AT-#A: With automatic float switch |
|
|
| |
|
|
Phone:
303-883-8000